The Rasmussen Custom Pan Burner is the original single pan tube burner. This gas fireplace burner can be used with out without legs and is perfect for single sided and double sided (see through) fireplaces. With the addition of the Valve Vanisher this burner addresses the three biggest issues regarding control systems when installed with gas burners and gas logs:

The Valve Vanisher eliminates the “Big Ugly Box” look that control systems give. It eliminates the off-centering or downsizing of the log set to accommodate the placement of the "Big Ugly Box".
The Valve Vanisher also places the heat sensitive controls in a cooler zone, reducing calls for service and increasing the life of the controls.

Raising the log set by 2 5/8″, having a Valve Vanisher creates a false floor under the burner where we locate the control system. In fireplaces with a dropped firebox or with a screen or glass door frame, this slight elevation may make the log set more viewable.

Fully factory tested and assembled the Rasmussen Custom Pan Burner w/ Valve Vanisher is easy to assemble. Just attach the gas supply, place the pan filler and embers, then top with either Rasmussen gas logs, FireStones, Smooth Fireballs or FireGlitter and your done.

Control Systems available are Manual Safety Pilot, Electronic Ignition with Variable Flame Remote and Millivolt that is Switch and Remote Ready. Electronic Ignition Systems are powered by four AA batteries (included). The 9-volt battery powered hand-held transmitter is included, and is used to turn the burner on, raise and lower the flame and turn the burner (and pilot) off. The EIS system used with the Valve Vanisher cannot be interfaced with home automation systems, exhaust fans or automatic dampers. The Millivolt Control System derives its power to operate from the standing pilot and thermo-generator. After manually lighting the pilot, it provides ON and OFF control from the switch installed on the front. It can also be operated from a wall switch, wall timer, or wireless remote control (all sold separately). Millivolt Controls are compatible with home automation systems, exhaust fans and automatic dampers.

Even though the Valve Vanisher can be obscured the air slots must be kept open for air flow to keep the valve and control module cool. The air slots can be “hidden”, but not “blocked shut”. Because of the configuration of the valves, the gas inlet is always on the right side. If your gas supply enters the fireplace from the left, you will need to route a gas line or connector tube(s) behind the log set to connect to the valve inlet on the right side.

PROP65 NOTICE WARNING: This product can expose you to Carbon Monoxide, which is on the list of substances known by the state of California to cause cancer, birth defects or reproductive harm.For more information: https://www.p65warnings.ca.gov/